- APX555B limited our measurement again
- 4PIN XLR+4.4mm+6.35mm output
- SE + BAL input pass through
RM1,399.00
- Ultra-High Performance
- 6.35mm SE & 4.4mm balanced output
- An excellent preamp
RM799.00
- Product type: HiFi rack
- Material: Aluminium and acrylic
- Colors: Transparent and silver
- Dimensions: 15.8 x 17.2 x 11.2cm
RM149.00
- Multi-function
- Contact to DAC
- Connect to active speaker/amplifier
- Driving a headphone
- Bluetooth Receiver for Car
RM269.00
- Bluetooth 5.0 Trasmission
- Auto Screen Close
- Easy to Operate
- Tablet and Phone Application
RM1,599.00
- Support Highest DSD512(Native) and PCM 32Bit/768kHz
- Bluetooth 5.0 LDAC transmission
- 2*ESS ES9038Q2M SABRE HIFI DAC
- THD+N as low as 0.00025%
- XMOS XU208 and customized drivers
- Auto on/off& Auto screen close
- USB/Coaxial/Optical DAC application
- DAC+Pre-amplifier/ Bluetooth receiver/Tablet and phone DAC application
RM899.00
- Bluetooth 5.0 LDAC transmission
- DAC+ Preamplifier application
- Built in Headphone amp
RM899.00
- 5V power supply, anytime and anywhere
- DAC filter mode
- Auto turn on/off
- DAC + Pre-amp application
- Pure DAC apptication
RM599.00
- Headphone amp Preamplifier application
- HiRes Audio
- Ultra High performance NFCA Modules
- 3 Level Gain Setting
RM599.00
- 40 hours long play back time;
- Full aluminum case;
- Micro USB charge port;
- TOCOS potentiometer;
- Intelligent charging with battery indicator
RM169.00
- Compatible with global voltage
- Sealed Toroidal Transformer
- High power reserve
- Instrument Level-Ultra Low Noise Linear Regulator
RM459.00
- Material: single strand silver plated wire plus oxygen-free copper wire
- Wire Category: RCA Interconnect Cable
- Colour classification: red + black
- Connector: Gold plating
- Length: 0.25 meters
RM159.00
- Wire using SGP-222
- Conductor resistance: 26.9Ω/KM
- Square number: 0.533MM²*2/19AWG*2
- OD: 8MM
RM319.00
- Wire using SGP-222
- Conductor resistance: 26.9Ω/KM
- Square number: 0.533MM²*2/19AWG*2
- OD: 8MM
RM199.00
- Headphone amp and pre-amp
- 4-pin XLR, 4.4 balanced, and 6.35mm outputs
- 3-step gain switch
- Can drive full-sized headphones and sensitive IEMs
- NFCA modules
- THD+N: <0.00006%
- DNR: 145dB
- Noise: <0.2uVrms
- Output impedance: <0.1Ω
- Maximum output power: 7600mW x2
RM2,199.00
- MQA Full Decoder ：Products with a full MQA Decoder, like D90SE DAC, unfold the file to deliver the highest possible sound quality. At this level of playback you are hearing what the artists created in the studio - with precise file and platform specific DAC compensation and management.
- Play back your music in higher quality： The performance of D90SE has reached a new peak: THD+N <0.00005%. Clearer details are at your fingertips.
- Bluetooth 5.0 LDAC transmission： D90SE has the certification of Hi-Res Audio Wireless and LDAC. It uses CSR8675 chipset to support L DAC/AAC/SBC/APTX/APTX LL/APTX HD protocol.
- IIS input supports up to DSD1024 native ：When there is a better interface, you can use the HDMI cable to directly send the lIS signal into the D90SE's ESS9038PRO for better decoder. IIS input can support up to PCM32bit 768kHz & DSD1024 native.
- Coaxial, Optical and AES input support MQA full decoder： D90SE not only support MQA input via USB, but all these inputs including UsB, coaxial, optical, AES can input MQA signal, which means you can hear more when playing MQA-CD.
RM3,599.00